Pages

Sunday, April 3, 2011

Hobby: Broodlord Kitbash


This is a project I actually did about 6 months ago.  I'm not a fan of the metal broodlord model, but I do like the unit.  I just don't feel like his look meshed well with normal genestealers.  His head isn't bulbous enough and those little t-rex gimp talons don't look like they could scythe anything.

I wanted something that looked like a normal genestealer that evolved a couple steps past the rest of the brood.  I also like my conversions to represent the difference in stats and wargear.  Broodlords are faster (initiative), stronger, have more attacks, and better armor so I wanted to represent all of those things in the new model.  I also like to keep costs to a minimum when possible, so I wanted to do all these things with extra bits from the kits I've already purchased.



I started with scything talons.  Big, strong, mantis-like ones not little gimpy ones like on the metal kit.  I ended up using the smallest scything talons from the mawloc kit.  I also took some of the tiny talons that line the mawloc belly and attached them to the sides of the head like mandibles.
Next, he needed more armor to represent his improved armor save, so I used two shoulder plates from the termagant kit, and three shoulder plates from the tyranid warrior kit (two spiked and one smooth).
Now he was looking very spiky and aggressive, but the model was very front-heavy and off balance.  I decided to give him a tail to help with balance, represent more attacks and possibly implant attack.  The tail is the ammo feed tube from a stranglethorn cannon arm.  I cut the curly tail off the normal genestealer and cut the feed tube where the thicknesses were about the same.  The rounded end that attaches to the stranglethorn cannon became the end of the tail and I glued on two more spiky bits.

I'm pretty pleased with the final result.  It looks like a genestealer in the brood with the rest, but different enough that it stands out as a sergeant.  The paint job is old, so I need to update that with more black and purple like my current genestealers.

You may also notice at the bottom there is a metal washer glued to the bottom of the base.  I actually glue metal washers on the bases of every single model in my army.  This accomplishes a few things.  I originally did it because hormagaunts and gargoyles tip over so easy being light plastic.  The washer gives the base enough weight that they never tip or fall, and I can even balance them on hills and terrain better.  I then got the idea to magnetize my display board so now all the models stay in place, even if I shake or tip the display board.  Finally, I glued a magnet to a stick and that's what I hold my models with while I'm painting them to keep my fingers off.

Hope you like it and maybe inspires some new ideas in y'all.

8 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Nice. Small scytal as the second pair of arms is the main thing I dislike in original model. Your variant looks more "real". Carapace is just fine.
    As for me, I don't like metal minis too, and I've found that broodlord from Space Hulk is awesome:)

    ReplyDelete
  3. That thing looks mean and nasty; I dig it. I also dislike the metal broodlord. I was planning on using the 'lord from space hulk, but thinking I will need more than one, so looking to scratch build one instead. I was considering using ravener parts as they have a great look to them as well.

    ReplyDelete
  4. Now that looks like something to kick some ass with. Nice conversion.

    Good idea with the washer, I usually use nickles to weigh down my top heavy troops, but the washer being magnetic it much better.

    ReplyDelete
  5. I had to re-work my Hive Guard and Tervigon kit-bashes/Conversions.
    One of my 6 Hive Guard (Warrior conversions) was a fraction smaller than the 'official model,' and I was accused of 'modeling for an advantage,' although ALL OF THEM are WIDER than the 'official model.'

    My Spider Tervigons, which were designed to walk around like Chaos Defilers, had to be put on the Trygon-sized base, because 'the INAT FAQ says so,' and raised up as well, since it's a Carnifex conversion, but not as tall as a Carnifex, due to the Talon legs and Spider-posture.
    I was accused of 'Modeling for an advantage' again.
    Ironically, the finished model extends slightly over the Trygon base (since it's not TALLER, it's 'longer'), but opponent's balked about measuring to and from a baseless model, and the INAT nonsense, so I gave in.

    I bring these points up because rules-lawyer stickler types seem to have a problem if there's an 'official model,' and when a conversion doesn't approximate that model's dimensions, well...you know how people can get, especially when they lose.

    The Broodlord is an interesting issue, since he's an upgrade character, and not an IC. However, the 'official model' IS a bit taller than the average 'stealer (I use the Space Hulk model- no metal in my army at all), and that could potentially mean the difference between getting LOS on the brood, or not.

    Now when I plan kibashes or whatever, I just take these factors into consideration. I'd hate to have an issue at a Tournament.
    Seems kinda silly to me, but it is what it is, and I just thought I'd mention it.

    Cool kitbash, regardless. I use those same 'back spines' on my Primes, along with other bits and pieces

    ReplyDelete
  6. Oh, for those that don't know yet- BIG NEWS FOR THE TYRANIDS!

    -TYRANIDS MAKE THE TOP 4 TABLES AT ADEPTICON-
    http://bloodofkittens.com/blog/2011/04/03/adepticon-2011-40k-campionship-coverage/

    Hopefully, this will go a long way to disproving the whole 'Tyranids aren't competitive' argument.

    ReplyDelete
  7. That's Jay Woodcock's nid army, the white and orange ones. He's the TO for Daboyz GT and on my ATC team. Very cool he made it to the top.

    ReplyDelete
  8. Also watch Jay's nid game here:
    http://www.ustream.tv/recorded/13755892

    ReplyDelete